SUPERCUT® Annular Cutter Pilot Pins (Center Pins)
SUPERCUT® Annular Cutter Pilot Pins (Center Pins) are used for position annular cutters over the drilling spot and eject the slug after drilling is completed. Accessory for the annular cutters, this center pin fits for a 1-inch cutting depth annular cutter, can help you make your drilling job more accurate and convenient.
Product Description:
- Suitable for annular cutters with 1” cutter depth
- Center pin diameter 1/4”,overall length 3-1/32”
- Locate the hole drilling center
- Eject the slug after drilling
- Initiate coolant flow into the center of the cutter
Specification:
SIZE
6.34 / 7.98
LENGTH
70mm / 103mm / 160mm
Features
Safety Guidlines
Features
- Pilot pin for magnetic cutters with standard 6.35mm thickness.
- Stepped head for lesser daimeter cutters.
- Fits in all cutter brands.
Safety Guidlines
- Ensure the pin has clearance from top of the cutter..if not it will damage the cutter and it wont get proper center guidance.
- After installing check the pin is pushed back in the arbor easily to not create any unwanted delays.
- You can re-grind the center pin to re-imberse the sharpness.
- Wear safety gloves while installing and using.
Technical Details
| Item No. | Description | SIZE |
| MGCTSPS | PILOT PINS FOR ANNULAR cutter | 6.34X77MM |
| MGCTLPS | PILOT PINS FOR ANNULAR cutter | 6.34X103MM |
| - | TOOL HOLDER FOR ANNULAR cutter | 19MM MT2 DRILLING DEPTH:30MM |
| - | TOOL HOLDER FOR ANNULAR cutter | 19MM MT2 DRILLING DEPTH:50MM |